Results 1 to 4 of 4

Thread: Front turn signal bulbs

  1. #1
    Join Date
    Dec 2013
    Location
    Owings Mills, MD
    Posts
    125

    Default Front turn signal bulbs

    I've got a front turn signal out so need to change the bulb. Can't see for sure how to get the beehive off to access the bulb.

    Appreciate the advice to change the bulb.

    Thanks,

    Jim

  2. #2
    Join Date
    Sep 2006
    Location
    Southeastern Pa.
    Posts
    2,817

    Default

    Jim, I seem to recall when I assembled my car they they just press fit into the rubber gasket, the trim ring just presses in as well. A bit of a pain to get them in but I'm pretty sure there are no bolts or screws involved.

    Tom
    Mangia bene, Ridi spesso, Ama molto, Guidare veloce

    2000 Caterham Superlight #123
    1.8L VHPD Rover K Series
    2009 Caterham SV
    2.3L Cosworth Duratec

  3. #3
    Join Date
    Jan 2006
    Location
    Seattle-ish
    Posts
    1,201

    Default

    I carefully use a pick to remove/replace. Just run it between the underside of the rubber gasket and the top of the lens (or metal trim ring if you have that style) and pry down as you pull up on the lens. There is generally a lot more swearing and need for alcoholic beverages when attempting to reinstall it.

    -John
    '95 Westfield SEiW w/2.0L Duratec
    '68 Lotus Elan FHC
    '91 Miata w/Flyin Miata suspension & brakes
    '95 Porsche 993 C2
    '86 Porsche 944 turbo (neglected project car)
    Throttle Steer

  4. #4
    Join Date
    Dec 2013
    Location
    Owings Mills, MD
    Posts
    125

    Default

    Thanks guys. Looked like it might pull off put didn't want to pull too hard and break something.

    I'll have a beer before I try to put it back together!

    Jim

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •