Results 1 to 4 of 4

Thread: Birkin XS For Sale

  1. #1
    Join Date
    Sep 2015
    Posts
    11

    Default Birkin XS For Sale

    It's with a heavy heart I put the Birkin up for sale. If I had a bigger garage I would not be making this post but it's time for the next phase of my car addiction. I'm asking $45,000.

    2015 Birkin XS (current generation Wide Body), build completed in Spring 2016. Current mileage on the car is 5,154 (as of 8/9/19)

    Used on the street, autocross, and on the track. Never wrecked or contact with anything.


    Engine Highlights:
    Ford Duratec 2.0L - Estimated 200hp
    All Engine Work was done by Gerlach Performance and Machine in Colorado
    Donor Engine was from a 2006 Ford Focus with less than 500 miles (engine was out of a car that was damaged in transport, hail damage and other body damage on a new car)
    Supertech 11.3:1 CR Forged Pistons
    Crower Stage 2 Intake and Exhaust Cams (pt# 62552-2)
    Jenvey Individual Throttle Bodies
    New Valve springs and retainers
    Crankshaft is OEM
    Raceline Wetsump
    Coil on Plug Ignition
    Return Type Fuel rail with adjustable fuel pressure regulator
    Walbro gsl394bx external fuel pump
    Holley Hydramat in the fuel tank to prevent fuel starve at low fuel levels
    Specialized Components Typhoon ECU (fully unlocked for tuning)
    Mocal 13 Row, 325 Matrix Oil Cooler with AN fittings


    Gearbox/Diff:
    Ford T9 5 speed Gearbox from a Ford Sierra (UK)
    Custom ratios with the typical long first gear (1st - 2.482 2nd - 1.61, 3rd - 1.225, 4th - 1.1, 5th - 0.87)
    Short throw gear selector
    Rear Differential is a R180 from a Subaru STI - 3.90 with a clutch type LSD


    Brakes:
    Wilwood Narrow dynalite 4 piston calipers in front
    98 VW Rabbit / 03 Audi TT rear calipers


    Misc:
    Weighs 1,300lbs with full cage, and 1,240lbs with just the roll bar
    Carbon Fiber Tillet B6 seats with custom pads (fits me comfortably and I'm 6'2" and 185lbs with a 32-33" pants waist), Larger than me can fit as well with how the seat is designed.
    Custom Full Cage built by Hank Moore at Advanced Auto Fabrication in Spokane, WA. The TIG welds are beautiful. Hank is very well know in the BMW world for creating competitive race cars.
    Painted Lotus Graphite Gray with Lotus British racing Green Stripe
    Setup for 6 point harnesses but 4 point will be included with the car
    Carbon Fiber Aeroscreen, and Windshield with defrost heat elements in the glass (interchangeable pretty quickly after you've done it a couple times, even with the cage)
    Carbon Fiber/Fiberglass dash
    Tall roll bar
    Short roll bar
    Custom Tonneau Cover
    Birkini top (covers the cockpit if using the windshield and roll bar, does not work with the cage)
    Custom Speed Hut Gauges - Speedo is GPS (so wheel size changes do not impact it) (Speedo, Tach, Oil Pres, Oil Temp, Water Temp, Fuel)
    Momo steering wheel with quick release hub


    I'm sure I'm missing a lot but this is the good stuff.


    Let me know if you or anyone is interested. It's a hell of a fun car and I am wishing I had room to keep it.


    The photos are of the various trims the car could be in. If you'd like anything specific, let me know.

    Brad
    NW MT

    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_20160731_135700015.jpg 
Views:	236 
Size:	57.5 KB 
ID:	14434  

    Click image for larger version. 

Name:	IMG_20160717_083407548_HDR.jpg 
Views:	233 
Size:	78.1 KB 
ID:	14435  

    Click image for larger version. 

Name:	NASAUtah2018Rd4CAM-143crop.jpg 
Views:	245 
Size:	48.7 KB 
ID:	14436  

    Click image for larger version. 

Name:	IMG_20160605_175938587_HDR.jpg 
Views:	10 
Size:	67.7 KB 
ID:	14437  

    Click image for larger version. 

Name:	IMG_20160605_175850320_HDR.jpg 
Views:	229 
Size:	71.5 KB 
ID:	14438  

    Last edited by Kink; 08-13-2018 at 01:01 PM.

  2. #2
    Join Date
    Dec 2014
    Location
    Los Angeles
    Posts
    154

    Default

    Nice car. Where did you get the cf windscreen for the XS?

  3. #3
    Join Date
    Sep 2015
    Posts
    11

    Default

    Quote Originally Posted by papak View Post
    Nice car. Where did you get the cf windscreen for the XS?
    Sorry papak, I don't remember off hand. I think it was this one. https://www.aerodynamix.co.uk/shop/e...viento-carbon/ I took measurements and I found something that was close enough and it worked out very well.

  4. #4
    Join Date
    Dec 2014
    Location
    Los Angeles
    Posts
    154

    Default

    Thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •