Where to drill

[edcetera]

Hello



A bit of measuring help if you please ?



referring to the picture on the following link I cobbled up...



>where to drill (http://photoed.digitalphotochat.com/SevenParts/abw)



I need to know X1 and Y dimensions as show



I have a new scuttle and need to poke some holes and need to know where to drill, plus minus 1/16" or plus minus 1 millimetre will do.



Thanks so much for any help in this endeavour.



Sincerely / Ed&nbsp;&nbsp;&nbsp;<edited><editID>edcetera</editID><editDate>2007-03-25 10:37:40</editDate></edited>

[yellowss7]

Ed, If you're looking for the distance from the front of the scuttle to the center of the first bolt on the windscreen stanchion, and then the distance between the two bolts, on my standard sized Catherham X1 is 47mm and Y is 140mm. Tom

[edcetera]

Ed, If you're looking for the distance from the front of the scuttle to the center of the first bolt on the windscreen stanchion, and then the distance between the two bolts, on my standard sized Catherham X1 is 47mm and Y is 140mm. Tom





Hello Tom



http://photoed.digitalphotochat.com/SevenParts/abw





I only need the X1 dimension and the Y dimension as shown in the picture above



Thanks / Ed<edited><editID>edcetera</editID><editDate>2007-03-25 14:59:54</editDate></edited>

[yellowss7]

Then I the figures I gave are what you want.&nbsp;&nbsp;&nbsp;http://www.usa7s.com/aspnetforum/images/emoticons/wink5.gif Tom

[edcetera]

Hello Tom

Thanks for your help



but



I need both X1 and Y dimensions I already knew the X distance between the holes&nbsp;&nbsp;&nbsp;its 5.5 inches (140mm)



Please look at the picture and re-read the question



http://photoed.digitalphotochat.com/SevenParts/abw



heres a new picture with less clutter



http://photoed.digitalphotochat.com/SevenParts/aby



Thank you



/ Ed<edited><editID>edcetera</editID><editDate>2007-03-25 17:10:42</editDate></edited>