Mystery V8 7 project for sale

[Ruadhd2]

No affiliation:

http://washingtondc.craigslist.org/nva/pts/2017248871.html

[slngsht]

I've talked to Dave many times...
He's a friend of Bob Drye.
I think he used to work for a NASCAR team. should be an interesting car.

[race fan]

The mystery V8 7 project is mine,the frame is 4 inches longer,4 inches wider and 2 inches taller,sort of like a Mcsorley but a little differant,the frame is made out of 1 1/2 0.83 square tubing,it has an SCCA legal roll cage made out of 1 1/2 dom 0.95 round tubing,mustang 2 front spindles,chrysler ball joints,custom lower contol arms,adjustable upper control arms,heavy duty hiem joints,pinto rack and pinion,heim joint tie rod ends,with adjustable bump steer,borgsan steering ujoints,ball bearing steering colum,removable steering,wheel,wilwood mastercylindeers,adjustable brake bias,2003 mustang cobra brakes,13 inch front rotors 2 piston front calipers.11.65 rear rotors,calipers with parking brake,4 link rear suspention with panard rod,4 mustang bullet wheels 17 x 10.5 rear,17 x 9.5 front,double pass custom radiator,electric fan,8.8 rear axel with 3.23 posi also 3.55 gear set,t5 transmision plus several other t5s and parts,.8 over drive gear set for t5,stock 5.0 ford v8,now for the engine,306 ci DDS short block,bilett crank,billet cap screw rods,forged flat top pistons,level 20 dds heat treated block,bored,decked,line bored,balanced,dds stud girgle with main studs,190 cc aluminiam heads 2.02/1.60 stainles steel valves,10 degree locks and retainers,screw in studs and stud girdle,crane roller rockers,ford motorsport x-303 cam,custom 8 quart oilpan,pump and pickup,aluminiam flywheel,hurst shifter,msd igniton box,autometer and vdo gauges,2 road race seats,2 rear fenders that need to be widened because the tires are so big,nose cone that needs to be widened,rci fuel cell,plus tons of othe parts that I forget
I have lost interest in thus project and want to sell it call me at 540-207-2042 any time thanks Dave

[11Budlite]

Now on Ebay: http://cgi.ebay.com/ebaymotors/LOTUS-7-V8-PRODJECT-/230545072731?pt=US_Cars_Trucks&hash=item35ad8ea25b (http://cgi.ebay.com/ebaymotors/LOTUS-7-V8-PRODJECT-/230545072731?pt=US_Cars_Trucks&hash=item35ad8ea25b)

Looks like a fun project!

[Off Road SHO]

Boy oh boy, if I could only get that across the country cheap enough, I would make him an offer on that bad boy.

Tom

[BrunnyS1]

Boy oh boy, if I could only get that across the country cheap enough, I would make him an offer on that bad boy.

Tom

I would not let that stand in the way.
Make him an offer,who knows?

[Off Road SHO]

And what? He'll deliver it?! I wonder if all of that would fit in the back of a UHAul 3/4 ton truck? The cost of gas to drive all the way ther with my own truck would be huge.

Tom

[Off Road SHO]

Dang, It sold.

[11Budlite]

The high bid was $2225.00 but it didn't meet reserve so it didn't sell. I'm REALLY surprised it didn't bid higher....

[glen]

It ended early because I made him an offer for a trade that works out for both of us. It will be coming to MN by Thanksgiving.

[11Budlite]

Congrats Glen, keep us updated on how the build goes!

[Off Road SHO]

Congrats Glen. I so wanted that but couldn't come up with the scratch and solution to the logistics. You got a heck of a head start there. Now if I can only find something like that closer to home. Good luck.

Tom

[glen]

Thanks guys, it'll be quite a haul to go get it, but appears to be a great headstart, Dave obviously wasn't cutting any corners. Unfortunately I'm not quite ready to start on it yet, so I may have to keep it locked in the trailer until I finish a few other projects, but this should keep me motivated. I'll have a build log on locostusa when I get started.

[WestTexasS2K]

congrats that looks like a great deal.

[Off Road SHO]

Unfortunately I'm not quite ready to start on it yet, .

Let me know if you need someone to take it over for you...Before you haul it home.

Tom