View Full Version : Birkin factory mags offset
KiwiBirkin
04-28-2009, 05:44 AM
Hi does anyone know what the offset is for the standard Birkin mags that are supplied with the car around the 1996/97 year of manufacture. These mags are still on my car and can be seen under the members rides section, I cant find the offset on the mags anywhere and would like to know as I want to replace them. In mm if you can please :)
Cheers KiwiBirkin
KiwiBirkin
04-28-2009, 05:38 PM
I found it its 30mm offset
Cheers KiwiBirkin
oilteq
04-28-2009, 10:24 PM
If you are going to have 2 sets of wheels and tires, you may consider 13-inch wheels for your more aggressive set, and the 15-inch for touring.
11Budlite
04-29-2009, 05:58 AM
I know there was a group buy on Kodiak 3-pc wheels a while back, but those wheels are pretty expensive these days. Same with the Panasport 3-pc. I have 15" Enkei RPF1's for my regular wheels and those are less than 10 lbs each. Any other wheels out there that are pretty light and not too expensive in a 13" size, 4 x 100, 30mm offset?
TheDingo8MyBaby
04-29-2009, 10:38 AM
Any other wheels out there that are pretty light and not too expensive in a 13" size, 4 x 100, 30mm offset?
V2 Competetion Drag wheels -13x8 +20 - 11 lbs.
Lenso VPD - 13x7.5 +25 - 8.5 lbs.
Davemk1
04-29-2009, 11:34 AM
I use Diamond racing wheels. They are lightweight steel wheels and they are made to order in most any bolt pattern and offset you'd like.
Mine are 13 x 8 and they weigh about 11 pounds and only cost about $65 two years ago when I got them.
Very good folks to deal with.
FWIW brake clearance on my 1999 Birkin up front was no problem but it was very tight in the rear. I did a bit of grinding to high spots on the caliper to get it to clear.
Dave
TheDingo8MyBaby
04-29-2009, 12:39 PM
Mine are 13 x 8 and they weigh about 11 pounds and only cost about $65 two years ago when I got them.
I see 14 lbs on diamond's website.
http://www.diamondracingwheels.com/ministock.html
Davemk1
04-29-2009, 01:21 PM
I see 14 lbs on diamond's website.
http://www.diamondracingwheels.com/ministock.html
OK..........
I weighed mine when they came in and I didn't write it down but they were less than 12#.
Better to ask Diamond if the weight is a concern to you.
dave
oilteq
04-29-2009, 06:31 PM
Another alternative is Real racing wheels
http://www.realwheel.net/products.php?catid=19
The 13 x 8s are about $195. Not as pretty as some of the other wheels. Of course, Panasport makes 13-inch wheels, but pricey.
11Budlite
04-30-2009, 09:32 PM
Thanks for your input guys. I don't think it's going to be this year, but maybe in the future if I can start doing some track days.
vBulletin® v3.8.1, Copyright ©2000-2012, Jelsoft Enterprises Ltd.